|
Materials Needed
4 1/2" ribbon 3/8" width
Single Prong Alligator Clip
Fabric Glue
Lighter for heat sealing
1 ¼" velvet ribbon (optional for a no slip grip) |
|
Step 1:
Heat seal the ends of both pieces of ribbon. Lightly and evenly coat the backside of the ribbon with fabric glue.
|
|
Step 2:
Open the alligator clip and insert the glue coated ribbon so it is sticking to the top of the inside of the alligator clip. |
|
Step 3:
Carefully wrap the ribbon around the top of the alligator clip making sure the edges of the ribbon are even and the glue is pressed together. |
| Step 4:
Press the ribbon inside the hinge. |
|
Step 5:
Press the final small piece on the bottom of the alligator clip. You may want to brace the ends with additional alligator clips until the glue is dry. |
| Step 6:
Coat the back of the small piece of velvet with fabric glue. |
| Step 7:
Carefully place the velvet ribbon inside the top of the alligator clip. |
